• star
  • cloudprnt
  • mqtt
  • star-line
  • esc-pos
  • webprnt

Star receipt printers and the cloud: the technologies they support

The main ways to send a print job to a Star Micronics receipt printer, from software and the cloud: CloudPRNT, command sets, SDKs, WebPRNT, PassPRNT, Star's hosted service, and what fits when.

A Star receipt printer can be reached from the cloud through CloudPRNT or a hosted service of Star’s own, and from an app or browser connected straight to the printer (on the same network, by USB or over Bluetooth) through Star’s SDKs, WebPRNT or PassPRNT, so the right route depends on where the print job starts. Separately, the printer understands one or more command sets (StarPRNT, Star Line Mode or, on some lines, ESC/POS), and as of October 2026 “supports X” in Star’s documentation usually means a series, a firmware and an interface, not a whole brand. This covers the main ways to send a print job, not every technology Star lists.

Command sets: StarPRNT, Star Line Mode and ESC/POS

Star’s own SDK names the emulations a printer can have: Star Line, Star dot-matrix, Star Graphic, StarPRNT and ESC/POS for mobile printers. The ones that matter most for the printers in this post:

  • StarPRNT is the command set Star’s product pages list as the emulation of three of its newer receipt printer lines, and over CloudPRNT it travels as application/vnd.star.starprnt.
  • Star Line Mode is the command set of Star’s older desktop printers. Star’s CloudPRNT page lists thermal and matrix printers of that kind as “Star Line mode” printers that reach CloudPRNT through an interface board, and CloudPRNT has its own media types for line mode.
  • ESC/POS is the command set Epson made, which many point-of-sale programs already speak. Star offers it as an emulation on some lines. In January 2026 it announced ESC/POS for one series of receipt printers, including its linerless label models, and for an impact printer over LAN, and its help centre describes DIP-switch changes for its Star Line Mode desktop printers and button changes for portable printers, apart from two portable models that do not have it. Star’s product page for that series lists its ESC/POS versions under separate part numbers. Star adds that ESC/POS compatibility does not mean compatible printers behave identically: an application may rely on specific character sets, barcodes, cutter commands or status responses.

The StarXpand SDK avoids the choice: Star says its commands work across Star printers, so an app does not have to pick an emulation.

From the cloud: CloudPRNT, its MQTT version and Star’s hosted service

CloudPRNT is Star’s open protocol. The printer polls a server address with HTTP, downloads a job when one is waiting and confirms it. All CloudPRNT printers support this version. You host the server; Star provides a protocol guide, helper libraries and a sample server that says it ignores security. In its developer guide Star recommends it when you want full control of your own server.

The MQTT version lets a printer keep a connection to a broker so the server can tell it to act, instead of the printer asking every few seconds. Star’s protocol guide lists it from firmware 1.0 to 5.1 depending on the line, and for one line only on some models; the table below gives the figures by kind of printer. Star’s product pages market this as CloudPRNT Next. Star’s sources disagree about which models of the 80 mm front-loading line have it: the guide names only some, while the Next page also lists wireless variants, so check the exact model.

Star’s hosted service, StarIO.Online (compared with Tillcast), is a managed CloudPRNT service. Star runs the servers, you call a REST API, and Star says it is built on the same technology as CloudPRNT. Printers need a minimum firmware: Star’s StarIO.Online guide lists the same figures as for CloudPRNT for the printers it covers (the older interface-board printers are not among them), while Star’s product pages name higher ones for some printers under “Star Micronics Cloud Services”, the platform it is offered through, so check the exact printer. Star recommends it when you want to avoid hosting any infrastructure.

Other cloud options exist outside Star’s own offers. A program on a computer in the venue can connect out to a cloud service and print to a printer that computer can already print to, and WCPOS’s documentation lists a hosted relay of that kind. Epson has its own polling design, Server Direct Print.

From the printer’s side: the SDKs, WebPRNT and PassPRNT

These reach a printer from a device that is directly connected to it: on its network, by USB cable or over Bluetooth. They are not cloud routes, although a cloud backend can sit behind them.

  • StarXpand SDK is Star’s current SDK: iOS (Swift), Android (Kotlin), React Native and Web (TypeScript). Its manual is at version 1.14.0, updated 15 September 2026. Star’s developer guide recommends it for new projects. The Web edition runs in Chrome (and Edge on Windows), and its manual (version 1.0.2, updated 16 October 2026) lists USB as the only interface.
  • StarPRNT SDK is the earlier SDK, for iOS, Android and Windows over USB, Bluetooth or LAN. Star says it remains fully supported and that existing integrations need not migrate.
  • WebPRNT lets a web page print from the browser with a JavaScript library, with no driver or plug-in. The page’s code sends the request straight to an address on the printer, which needs a WebPRNT interface; a separate WebPRNT Browser app serves Bluetooth and USB printers. If the page is served over HTTPS, the request to the printer must be HTTPS too, with certificates on both sides. Star’s own pages disagree on which printers have the interface, so confirm the model.
  • PassPRNT prints through a separate relay app installed on the device, instead of printer communication built into your own app. Star’s developer guide counts it among its main routes.

NoteThese routes run beside the printer

They work from a device or a browser connected straight to the printer (the same network, USB or Bluetooth). As we read it, printing from the cloud through them takes an app or page in the venue that fetches the job first.

What “supports” means, line by line

Star states support per series and firmware. The table gives what Star’s pages say, not a model list; read the protocol guide for the exact unit.

Kind of printer CloudPRNT HTTP, from firmware MQTT version, from firmware Command set Star lists
80 mm receipt line, front paper loading 1.2 5.1, some models StarPRNT
58 mm receipt line, front paper loading 1.2 none listed StarPRNT
80 mm receipt line for horizontal or vertical use, and its linerless label variant 1.0 (2.0 for the label variant) 2.2 (ESC/POS versions: see below) StarPRNT; ESC/POS on separate versions since 2026
Two label lines 1.0 1.0 and 1.5 (one without Pass URL, an MQTT mode) not covered here
Older desktop printers, thermal and matrix with an interface board (minimum board firmware 1.1 to 1.9 by model, plus a minimum printer version) none listed Star Line Mode

The same word covers different things. CloudPRNT needs a minimum firmware, and in the MQTT case only some models of a series. A web SDK depends on the browser and the interface. ESC/POS depends on the model and sometimes on the interface, as with one impact printer over LAN, and on the part number: Star’s sources disagree on whether the ESC/POS versions of the horizontal or vertical 80 mm line have the MQTT version (its product page marks CloudPRNT Next as unavailable on them, its January 2026 announcement lists it for the variants with four interfaces), so check the part number.

Which route suits which situation

Situation Route Star describes
Software on a server reaching printers in many venues, with your own infrastructure CloudPRNT over HTTP
The same, with no server of your own Star’s hosted service, StarIO.Online
Printing that starts sooner than polling allows The MQTT version, on newer firmware, with a broker
A native app on the device beside the printer StarXpand SDK for new work, StarPRNT SDK for existing work
A web app in a browser at the venue WebPRNT (on the network, or with the WebPRNT Browser app for Bluetooth and USB), or the Web SDK over USB
An app that leaves the printer connection to a separate app on the device PassPRNT
A point-of-sale program that only speaks ESC/POS ESC/POS emulation, on the lines that have it

Star says these combine: a CloudPRNT backend often pairs with StarXpand for functions inside the store.

How Tillcast uses it

Of everything above, Tillcast is a CloudPRNT server. As of October 2026 it uses the HTTP version, in which the printer polls, and it sends StarPRNT commands. It serves Star receipt printers that support CloudPRNT and speak StarPRNT; Star’s older line-mode printers on its CloudPRNT list are not served. A model counts as working only after it has run on a real device. The Printers page lists what has: the full test page was printed on a Star printer on 2026-10-16. WebPRNT and the SDKs reach a printer directly and are not part of Tillcast. The docs cover setting up a Star printer and supported printers.

One integration instead of one per route

Printers reach the cloud in different ways: CloudPRNT or StarIO.Online for Star, Server Direct Print for Epson. Supporting each route yourself means building and running a server for most of them (Star’s hosted service is the exception) and keeping up with the firmware and model rules of each printer line. A service such as Tillcast does that once: your software sends one job to one API, and Tillcast speaks the protocol of the printers it supports. Today that covers Star receipt printers that support CloudPRNT and speak StarPRNT, and Epson printers over Server Direct Print; the Printers page lists what has run on a real device. How Tillcast compares with StarIO.Online sets the two services side by side.

Sources

Read in October 2026; Star changes these pages, so check dates and versions.